Netgear RN526X00 Hardware Manual - Page 49
Table 5. ReadyNAS 212 indicator descriptions, NETGEAR ReadyNAS 212, ReadyNAS OS 6 Desktop Storage
View all Netgear RN526X00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
ReadyNAS OS 6 Desktop Storage Systems Table 5. ReadyNAS 212 indicator descriptions Indicator Description Power button and LED Press this button to turn on the ReadyNAS. The LED indicates these states: • On. Powered on. • Blinking. Booting or shutting down. • Off. Powered off. Disk LEDs (1, 2) An LED on the front panel of the storage system is associated with each drive bay The disk LEDs indicate these states: • On. Power is on and the disk is operating normally. • Blinking. The disk was removed, failed, or is resynchronizing. See the display screen for details. • Off. The drive bay is empty. Disk activity LED The disk activity LED indicates these states: • Blinking. A disk is active. • Off. disk is idling. Rear panel Ethernet port Two LED status indicators are built into each port, one off or green and one showing LEDs three states: off, amber, or green. They indicate port speed and activity as follows: • Green, green. 1000 Mbps connection speed, no activity. • Green blinking, green. 1000 Mbps connection speed, activity. • Green, amber. 100 Mbps connection speed, no activity. • Green blinking, amber. 100 Mbps connection speed, activity. • Green on, off. 10 Mbps connection speed, no activity. • Green blinking, off. 10 Mbps connection speed, activity. • Off, off. No connection. Power On and Shut Down This section describes how to power on and shut down your system. If you must shut down the system, use one of the preferred shutdown methods whenever possible. NETGEAR ReadyNAS 212 49