Netgear RN526X00 Hardware Manual - Page 64
Power On and Shut Down, Power On, Table 7. ReadyNAS 312 indicator descriptions, NETGEAR ReadyNAS 312
View all Netgear RN526X00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
ReadyNAS OS 6 Desktop Storage Systems Table 7. ReadyNAS 312 indicator descriptions Indicator Description Power button and LED Press this button to turn on the ReadyNAS. The LED has these states: • On. Powered on. • Blinking. Booting or shutting down. • Off. Powered off. Disk LEDs (1, 2) An LED on the front panel of the storage system is associated with each drive bay The disk LEDs have these states: • On. Power is on and the disk is operating normally. • Blinking. The disk was removed, failed, or is resynchronizing. • Off. The drive bay is empty. Disk activity LED The disk activity LED has these states: • On. At least one disk is present. • Blinking. A disk is active. • Off. All disks are idle. Rear panel Ethernet port Two LED status indicators are built into this port, one green and one amber. They LEDs indicate port speed and activity as follows: • Green on, amber off. 1000 Mbps connection speed, no activity. • Green blinking, amber off. 1000 Mbps connection speed, activity. • Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity. • Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity. • Green off, amber off. No connection. Power On and Shut Down This section describes how to power on and shut down your system. If you need to shut down the system, use one of the preferred shutdown methods whenever possible. Power On When you connect the system to a power supply or the system recovers from a power outage, the following occurs: NETGEAR ReadyNAS 312 64