Netgear WAB102 WAB102 User Manual - Page 18

Log In to the Access Point, Con Basic Setup Parameters, For advanced users, Having problems? - password

Get Netgear WAB102 - 802.11a+b Dual Band Wireless Access Point PDF manuals and user guides
UPC - 606449025231
View all Netgear WAB102 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

User's Guide for the WAB102 802.11a+b Dual Band Wireless Access Point For advanced users: To access the built-in Web Server home page on the WAB102, we suggest that you have a DHCP server on the Ethernet Network. If there is no accessible DHCP server, the WAB102 Access Point will default to the IP address of 192.168.0.226 with a subnet mask of 255.255.255.0. You will need to configure the IP address of the computer to be within the same subnet for the initial configuration. Having problems? Refer to Chapter 4, "Troubleshooting". 4. Click AP Setup to configure the WAB102 Access Point, and proceed to the next section, Log In to the Access Point. Log In to the Access Point To set up your access point, complete the following login steps: 1. Click on the AP Setup link on the WAB102 Web Server home page. 2. The Enter Network Password window will be displayed, as shown above. Enter the default user name admin with the default password 1234 in this window. Note: Both the user name and password are case sensitive. You may change the password at any time after this point by choosing Password from the AP Setup menu 3. Click OK. The TCP/IP LAN Setup window will be displayed as shown below. Configure Basic Setup Parameters To set up your access point, complete the following: Setting Up Basic Wireless Connectivity 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
User’s Guide for the WAB102 802.11a+b Dual Band Wireless Access Point
Setting Up Basic Wireless Connectivity
15
For advanced users:
To access the built-in Web Server home page on the
WAB102, we suggest that you have a DHCP server on the Ethernet Network.
If there is no accessible DHCP server, the WAB102 Access Point will default
to the IP address of 192.168.0.226 with a subnet mask of 255.255.255.0. You
will need to configure the IP address of the computer to be within the same
subnet for the initial configuration.
Having problems?
Refer to
Chapter 4, “Troubleshooting”
.
4.
Click AP Setup to configure the WAB102 Access Point, and proceed to
the next section, Log In to the Access Point.
Log In to the Access Point
To set up your access point, complete the following login steps:
1.
Click on the AP Setup link on the WAB102 Web Server home page.
2.
The Enter Network Password window will be displayed, as shown above.
Enter the default user name
admin
with the default password
1234
in this
window
.
Note:
Both the user name and password are case sensitive.
You may change the password at any time after this point by choosing
Password from the AP Setup menu
3.
Click OK. The TCP/IP LAN Setup window will be displayed as shown below.
Configure Basic Setup Parameters
To set up your access point, complete the following: