Netgear WAC120 Reference Manual - Page 11
Install the Access Point
View all Netgear WAC120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
802.11ac Wireless Access Point Model WAC120 Install the Access Point Make sure that your Internet service is active before you install your access point. To install your access point: 1. Prepare your network. Make sure that your modem is cabled only to the wall jack for your Internet service. 2. Connect your devices. 1 2 3 4 a. Plug in, then turn on your gateway or modem. b. With an Ethernet cable, connect your gateway or modem to a network switch. c. With the Ethernet cable that came with the access point, connect the network switch to the LAN port on your access point. Initial Setup 11
Initial Setup
11
802.11ac Wireless Access Point Model WAC120
Install the Access Point
Make sure that your Internet service is active before you install your access point.
To install your access point:
1.
Prepare your network.
Make sure that your modem is cabled only to the wall jack for your Internet service.
2.
Connect your devices.
1
2
3
4
a.
Plug in, then turn on your gateway or modem.
b.
With an Ethernet cable, connect your gateway or modem to a network switch.
c.
With the Ethernet cable that came with the access point, connect the network switch
to the LAN port on your access point.