Netgear WAC120 Reference Manual - Page 57

802.11ac Wireless Access Point Model WAC120 • Wireless MAC Address for 5 GHz. The MAC address of the access point's 5 GHz wireless port. • Band Steering. Indicates whether band steering is enabled or disabled. • Country/Region. The domain or region for which the access point is licensed for use. It might not be legal to operate this access point in a region other than one of those identified in this field. • Firmware Version. The version of the firmware currently installed. • Serial Number. The serial number of the device. • Current Time. The time setting for the access point. The following current IPv4 settings information displays: • IP Address. The IP address of the access point. • Subnet Mask. The subnet mask for the access point. • Default Gateway. The default gateway for the access point communication. • DHCP Client. Enabled indicates that the current IP address was obtained from a DHCP server on your network. Disabled indicates a static IP configuration. The following current wireless settings for each wireless band display: • Operating Mode. Identifies the 802.11 operating mode of the access point. - Access Point - Point-to-Point Bridge - Point-to-Point Bridge with Access Point - Multi-Point Bridge • Channel / Frequency. Identifies the channel that the wireless port is using. View Available Wireless Stations You can view all IP devices associated with this access point in the wireless network defined by the wireless network name (SSID). If your network includes more than one access point sharing the same SSID, remember that you can view only the wireless stations associated with this access point.  To view the Available Wireless Stations list: 1. Launch a web browser on the computer that is connected to the access point. 2. Enter http://192.168.0.100 in the address field of the browser. A login prompt displays. 3. Enter the user name and password. The user name is admin and the default password is password. Monitoring 57