Netgear WAC120 Reference Manual - Page 6
System Requirements, Unpack Your Access Point
View all Netgear WAC120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
802.11ac Wireless Access Point Model WAC120 System Requirements Before installing the access point, make sure that your system includes the following: • A 10/100/1000 Mbps local area network device such as a hub or switch • The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the package, or one like it • A 100-120 V, 50-60 Hz AC power source • A web browser for configuration • At least one computer with the TCP/IP protocol installed • 802.11b/g-compliant or 802.11b/g-compliant devices Unpack Your Access Point Your package contains the following items. WiFi On/Off Ethernet cable WPS Access point Power adapter Figure 1. Package contents Your box contains the following items: • 802.11ac Wireless Access Point Model WAC120 • AC power adapter (plug varies by region) • Category 5 (Cat 5) Ethernet cable • Installation guide with cabling and access point setup instructions If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Hardware Setup 6