Netgear WB7530 User Manual - Page 258

ProSAFE Wireless Controller Setting Description Password (FTP only) Enter the password to access the FTP server. Boot Information section Active Partition This field is an informational field that displays the active partition and the current firmware version. Boot Partition to Upgrade Select the radio button for the partition to which the new firmware must be saved. After upgrade boot from Select the radio button for the partition from which the wireless controller must reboot after the firmware is upgraded. Schedule section Schedule Update Status This field is an informational field that displays when the firmware upgrade occurs. If no update is scheduled, the field displays None. When to Upgrade? Select when the firmware upgrade must occur: • Later. Make selections from the menus to specify the date and time when the upgrade must occur. • Now. The upgrade occurs immediately after you click the Apply button. WARNING: When you click the Apply button and the Now radio button is selected to upgrade the firmware immediately, do not try to go online, turn off the wireless controller, shut down the computer, or do anything else to the wireless controller until the wireless controller finishes rebooting. When the Status LED turns green, wait a few more seconds before you do anything. 7. Click the Apply button. Unless you scheduled the firmware upgrade for a particular time, the firmware is upgraded immediately, and the wireless controller reboots. 8. To verify that the wireless controller is running the latest firmware, do the following: a. Select Monitor > Network > Controller. The Controllers page displays. b. Verify the firmware version in the Version column. Note: After you upgrade the firmware, if the browser does not display the latest features of the web management interface, clear the browser's cache, and refresh the page. Maintain the Wireless Controller and Access Points 258