Netgear WC7600-Premium User Manual - Page 259
Reboot the Wireless Controller, Login, Maintenance > Reboot/Reset > Controllers, reboot, Apply
View all Netgear WC7600-Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
ProSAFE Wireless Controller Reboot the Wireless Controller The Reboot/Reset Controllers page lets you reset the wireless controller. To reboot the wireless controller: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Maintenance > Reboot/Reset > Controllers. 5. Select the reboot radio button. 6. Click the Apply button. The wireless controller reboots. The reboot process is complete after several minutes when the Status LED on the front panel turns green. Reset the Wireless Controller You can perform a hard or soft reset of the wireless controller: • Hard reset. The settings of the wireless controller are restored to factory default settings. This reset is the same as the reset that occurs when you press the Reset button on the front panel. • Soft reset. Saves the IP and VLAN addresses and managed access point list but clears all other settings such as profiles, profile groups, and authentication servers. Note: Restoring the factory default settings of the wireless controller does not restore the settings of the access points that the wireless controller manages. Maintain the Wireless Controller and Access Points 259