Netgear WC7600-Premium User Manual - Page 291
Manage Redundancy for a Single Controller, VRRP Redundancy Concepts
View all Netgear WC7600-Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
ProSAFE Wireless Controller Manage Redundancy for a Single Controller The wireless controller supports 1:1 redundancy with failover. Redundancy is implemented through the use of the Virtual Router Redundancy Protocol (VRRP). For information about N:1 redundancy, see Manage a Redundancy Group With N:1 Redundancy on page 297. VRRP Redundancy Concepts You can configure two controllers to form a redundancy group. You then designate one controller in the redundancy group as the primary controller (the master) and the other wireless controller as the redundant controller (the secondary controller). If the primary controller fails or is disconnected from the network, an automatic failover to the redundant controller occurs. The redundant controller then takes over all functions of the primary controller. Note: When a redundancy failover occurs, WiFi clients might experience a service interruption of a few seconds. Requirements and Restrictions for 1:1 Redundancy These are the requirements and restrictions for a single controller with redundancy to function correctly: • The primary controller and redundant controller must be in the same management VLAN and IP subnet. • The VRRP ID for the relationship between the primary controller and redundant controller must be unique and also different from any other VRRP IDs that might be used for other purposes in the network. • The primary controller and redundant controller must run the same firmware version. If the firmware versions do not match, redundancy does not work. • The licenses on the redundant controller must match those on the primary controller. If the licenses do not match, redundancy does not work. • The primary controller and redundant controller must be assigned the same controller IP address at which they provide the service, but each controller is assigned its own unique local IP address. Manage Stacking and Redundancy 291