Netgear WC7600-Premium User Manual - Page 84
Display or Change the WiFi Inventory for an RF Plan, Total Number of AP
View all Netgear WC7600-Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
ProSAFE Wireless Controller Note: The Coverage icon is masked if you did not generate a heat map. The Total Number of AP and Total Number of Antenna fields are based on the RF plan and fixed. The Wi-Fi Coverage Percentage (%) field displays the WiFi coverage based on the position of the Minimum Signal Strength slider at -62dBm. 10. Move the position of the Minimum Signal Strength slider to another dBm value. 11. Click the Re-Calculate button. The Wi-Fi Coverage Percentage (%) field displays the WiFi coverage based on the new dBm value. 12. Click the OK button. The pop-up window closes. If you want to change the actual minimum signal strength for an RF plan, run the WiFi auto planning advisor again (see Use the WiFi Auto Planning Advisor to Generate an RF Plan for a Floor on page 70). Display or Change the WiFi Inventory for an RF Plan The inventory for an RF plan of a floor displays all access points and antennas that you added by running the WiFi auto planning advisor, the access points and antennas that you added manually, or a combination of both. To display or change the access point and antenna inventory for an RF plan: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Plans > Planning. RF Planning and Deployment 84