Netgear WC7600-Premium User Manual - Page 39
High-Level Configuration Examples, Single Controller Configuration With Basic Profile Group
View all Netgear WC7600-Premium manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ProSAFE Wireless Controller High-Level Configuration Examples This section includes the following subsections: • Single Controller Configuration With Basic Profile Group • Single Controller Configuration With Advanced Profile Groups • Stacked Controller Configuration Single Controller Configuration With Basic Profile Group A basic configuration consists of a single wireless controller that controls a collection of access points that are organized into the basic default group. To set up a single wireless controller system with a basic profile group: Step Configuration Web Management Interface Path 1. Configure the system and network settings of the wireless controller: 1. Configure the country code of operation. Configuration > System > General 2. Configure the time settings. Configuration > System > Time 3. Configure the IP address of the wireless controller. Configuration > System > IP/VLAN 4. Verify that VLAN 1 is set as the management VLAN and is marked as untagged. By default, VLAN 1 an untagged management VLAN. 5. If no network DHCP server is accessible to the access points, Configuration > System > DHCP configure the wireless controller's DHCP server. Server 2. Configure up to eight profiles, and for each profile, do at least the following: 1. Configure an SSID for WiFi access. 2. Configure the network authentication and data encryption. Configuration > Profile > Basic 3. Assign the VLAN. 4. If necessary for the selected network authentication option, Configuration > Security > Basic > configure the authentication server. Authentication Server 3. Run the Discovery Wizard and add the access points to the managed access point list. Access Point > Discovery Wizard System Planning and Deployment Scenarios 39