Netgear WC7600 Reference Manual - Page 260
Search, and menu that display at the bottom of the table
View all Netgear WC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
ProSAFE Wireless Controller WC7600 The following table describes the fields of the network Clients table: Item Select MAC IP Location AP-Name AP-IP AP-MAC Client Type Usage (KBytes) RSSI Building Floor SSID Security Controller IP Uptime Description The radio button that lets you select the client. The MAC address of the wireless client. The IP address of the wireless client. Note the following: • If clients and the access point to which they are connected are in the same VLAN, all receive an IP address from the same DHCP server. • If clients and the access point to which they are connected are not in the same VLAN, you must have a DHCP server for the client VLAN. • If clients are not connected to any DHCP server, IP addresses in the 169.254.x.x. range are assigned automatically. The location of the access point (see Change Access Point Information on the Managed AP List on page 133) to which the wireless client is connected. The name of the access point (see Change Access Point Information on the Managed AP List on page 133) to which the wireless client is connected. The IP address of the access point to which the wireless client is connected. The MAC address of the access point to which the wireless client is connected. The wireless mode that the wireless client is using to connect to the access point (802.11ng, 802.11 bg, 802.11 b, 802.11na, or 802.11a). The traffic usage of the wireless client in KB. The received signal strength indicator (RSSI) of the wireless client. The building designation is always Building-1. The floor designation is always Floor-1. The wireless network SSID that the wireless client is using to connect to the access point. The security mode (Open, WEP, WPA, WPA2, or WPA/WPA2) that the wireless client is using to connect to the access point. The IP address of the wireless controller that manages the access point to which the wireless client is connected. The period that the client is connected to the wireless controller. 5. To sort the table, click the double triangle icon or single triangle icon next to a column header. 6. To search the table, in the Search field, enter the information that you are looking for such as an IP address or MAC address. 7. If the table contains many entries, navigate through the table by using the following buttons and menu that display at the bottom of the table: • To move to the next page, click the Next button. Monitor the Wireless Network and Its Components 260