Netgear WC7600 Reference Manual - Page 83
Wireless Security Profile Concepts, Small WLAN Networks
View all Netgear WC7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
ProSAFE Wireless Controller WC7600 Wireless Security Profile Concepts Profiles are sets of configurations that you can apply to an access point. The configuration includes radio parameters, load-balancing parameters, and rate-limit parameters. Each wireless radio on an access point can support 8 profiles. For example, the dual-band WNDAP660 access point can support a total of 16 profiles. Therefore, in one profile group on the wireless controller, you can configure up to 8 profiles for each radio, that is, up to 8 profiles for the 2.4 GHz radio and up to 8 profiles for the 5 GHz radio. Setting up profiles allows you to configure the WLAN network offline. Then, when the WLAN network is operating, you can push the configuration onto managed access points. You can configure profiles and profile groups without taking the state of the access points into consideration. When the access points connect to the wireless controller, the profile configurations are pushed onto the access points. An access point can be a member of one profile group only. If you move an access point from one profile group to another, the access point stops serving the SSIDs in the old profile group and starts serving the SSIDs in the new profile group. Note: If an access point is removed from its building (someone takes it home or it is stolen), the access point does not retain the configuration that it received from the wireless controller. The configuration is not stored in memory on the access point. Depending on your network needs, you can either use the basic profile group (that is, the basic configuration) or the advanced profile groups (that is, the advanced configuration). The basic profile group works well for small-scale WLAN networks; advanced profile groups are useful for larger deployments. Note: For more information about basic and advanced profile groups, see Basic and Advanced Setting Concepts on page 22. Small WLAN Networks For small WLAN networks, you can use the basic configuration with the basic profile group. All access points belong to the same group and use the same wireless, security, and QoS configurations. The basic profile group can contain up to 16 profiles for a dual-band access point, or eight profiles for a single-band access point. Each profile has its own SSID and can have its own VLAN to allow the profile to establish its own tunnel. Profiles can also share the same VLAN. For example, in an enterprise network in which all access points that are managed by the wireless controller serve the same wireless networks and have the same settings, you can use the basic configuration. Manage Security Profiles and Profile Groups 83