Netgear WG511T WG511T User Manual - Page 12

NETGEAR 108 Mbps Wireless PC Card WG511T User Manual • Large metal surfaces • Microwaves • 2.4 GHz Cordless phones In general, wireless devices can communicate through walls. However, if the walls are constructed with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are between the devices. For more information, see the link to "Wireless Communications" in Appendix B. What Is in the Box The product package should contain the following items: • NETGEAR 108 Mbps Wireless PC Card WG511T • Installation Guide for the NETGEAR 108 Mbps Wireless PC Card WG511T • NETGEAR CD, including: - Driver and Smart Wizard Software - NETGEAR 108 Mbps Wireless PC Card WG511T User Manual • Warranty card • Support information card If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair. WG511T Default Wireless Settings If this is a new wireless network installation, use the factory default settings to set up the network and verify wireless connectivity. If this is an addition to an existing wireless network, you will need to identify the wireless network and wireless security settings that are already defined. Your NETGEAR 108 Mbps Wireless PC Card WG511T factory default basic settings are: • Network Name Service Set Identification (SSID): Any (First available network) Note: In order for the WG511T Wireless PC Card to communicate with a wireless access point or wireless adapter, all devices must be set up to use the same wireless network name (SSID). 1-2 Basic Setup v3.0, January 2007