Netgear WG602v3 WG602v3 User Manual - Page 30
NetBIOS Name Login, admin, password, NETGEARx
View all Netgear WG602v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual 3. When prompted enter the default User Name admin and default Password password into the login window and click OK. Figure 2-7 Once you have entered your User Name and Password, your Web browser should automatically find the Wireless AP and display the home page, as shown in Figure 2-3 on page 2-4. NetBIOS Name Login The NETGEAR WG602v3 54 Mbps Wireless Access Point can be configured remotely from Microsoft Internet Explorer browser version 5.0 or above, or Netscape Navigator Web browser version 4.78 or above or Mozilla Firefox. You can connect to the WG602v3 by using its default NetBIOS name or its default IP address. To connect using the default IP address: 1. Enter the NetBIOS name of your access point. The default NetBIOS name is NETGEARxxxxxx where xxxxxx is the last 6 digits of the WG602v3's MAC address (for example, NETGEAR123456, with no spaces or delimiters.). To locate the NetBIOS name of your WG602v3, see the bottom label. Note: If the computer you are using to connect to the WG602v3 is on a different subnet, you will not be able to connect via its NetBIOS name unless there is a WINS server on your LAN. If the NetBIOS name login fails, use the procedure for "IP Address Login" on page 2-9 2. Open a Web browser. 2-10 v1.0, August 2006 Installation and Configuration