Netgear WG602v3 WG602v3 User Manual - Page 75
Repeater with Wireless Client Association, Static IP Address - firmware upgrade
View all Netgear WG602v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual Password default 2-4 password changing 3-6 Placement 2-1 placement guidelines 2-1 Point-to-Point Bridging about 4-1 Point-to-point bridging 4-1 point-to-point bridging configuring 4-2 example of 4-3 Preamble Type 4-14 R Range 2-1 range guidelines 2-1 Reboot 5-3 reboot 3-5 rebooting 3-4 Repeater with Wireless Client Association 4-1, 4-7 configuration of 4-7 example 4-8 reserved IP address 2-9 Reset 5-3 Reset Button Factory Defaults, restore 3-5 reboot 3-5 Reset button how used 1-6 location of 1-6 restore factory defaults 3-5 restore factory settings 3-5 RTS Threshold 4-13 RTS/CTS 1-3 S Scope of Document 2-vii Set Password 3-6 Shared Key WEP Authentication 2-13 Site Survey Fields 4-12 software upgrade 3-3 SSID 2-6, 3-2 attached devices 3-2 client mode, selection of 4-11 default name 2-6 SSID Broadcast 2-6 SSID, broadcast of turning off 2-12 Static IP Address 5-3 static IP address 2-3 Station List 3-3 T TCP/IP 5-2 obtains IP address 5-3 TCP/IP configuration 2-3 TKIP 2-14 troubleshooting 5-1 U Upgrade Firmware how to 3-4 upgrade software how to 3-4 Upgradeable Firmware 1-2 Upgrading software 3-3 User Name default 2-4 W WEP 2-12 Encryption Key 2-14 Passphrase 2-14 WEP Authentication Shared Key 2-13 WEP authentication Mix, default 2-13 v1.0, August 2006 Index-3