Netgear WNDA4100 WNDA4100 User Manual - Page 8

N900 Wireless Dual Band USB Adapter (WNDA4100) • WPS Support. Identifies whether the router or access point for this network supports WPS (Wi-Fi Protected Setup). • MAC Address. The unique hardware address of the wireless device broadcasting this information. Typically, this is a wireless router, gateway, or access point. Join a Network or Connect to a Different Network You can use WPS to join a wireless network if your wireless network supports it, or you can join a wireless network from this NETGEAR Genie screen. • WPS. Press and hold the WPS button on the side of the adapter for 3 seconds. Then within 2 minutes, press the WPS button on your wireless router or gateway. Your settings are saved in a profile with -WPS at the end. • NETGEAR Genie. Click your wireless network to select it from the list, and then click Connect. If the network is secure, enter its password or network key. After the adapter joins the network, it automatically saves the network connection information to a Windows profile. Windows profiles can be used by Genie and the Windows utility. The next time you launch NETGEAR Genie, it will automatically connect to the network you previously joined if there's no change in the network information.  To use WPS to join a wireless network: 1. Press and hold the WPS button on the side of the adapter for 2 seconds. 2. Then within 2 minutes, press the WPS button on your wireless router or gateway The adapter joins the network, which can take a few minutes. Your settings are saved in a profile. Set up Your Wireless Adapter 8