Netgear WNDAP330 WNDAP330 User Manual - Page 60

Configuring WEP - wireless client security separation

Get Netgear WNDAP330 - ProSafe - Wireless Access Point PDF manuals and user guides
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual • To configure WEP encryption for Open Systems or Shared Key, see "Configuring WEP" on page 2-34. • To configure WPA with RADIUS, see "Configuring WPA with RADIUS" on page 2-36. • To configure WPA2 with RADIUS, see "Configuring WPA2 with RADIUS" on page 2-37. • To configure WPA and WPA2 with RADIUS, see "Configuring WPA and WPA2 with RADIUS" on page 2-38. • To configure WPA-PSK, see "Configuring WPA-PSK" on page 2-39. • To configure WPA2-PSK, see "Configuring WPA2-PSK" on page 2-40. • To configure WPA-PSK and WPA2-PSK, see "Configuring WPA-PSK and WPA2-PSK" on page 2-41. 8. Wireless Client Security Separation is disabled by default. If enabled, the associated wireless clients will not be able to communicate with each other. 9. If the hubs/switches on your LAN support the VLAN (802.1Q) standard and this feature has been enabled, the default VLAN ID for WNDAP330 will be associated with each profile. The default Profile VLAN ID must match the IDs used by other network devices. 10. Click Apply to save your Security Profile settings. 11. Click Back. Your new settings will appear in the Security Profiles table identified by the Profile Name of the profile. A VLAN ID will also be assigned to your profile. Note: Security Profiles that share the same type of network authentication need not share the same passphrase or keys. Security Profiles that use WEP must share the same four keys, but they do not need to use the same default key. To enable your Security Profile: 1. Check the radio box in the Enable column next to your profile. 2. Click Apply. Your Security Profile will be enabled. If you enabled VLAN 802.1Q, your VLAN Profile will also be enabled. (See "Setting Basic IP Options" on page 2-13 to enable VLAN 802.1Q.) Configuring WEP To configure WEP data encryption: 2-34 v1.0, May 2008 Basic Installation and Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
2-34
Basic Installation and Configuration
v1.0, May 2008
•
To configure WEP encryption for Open Systems or Shared Key, see
“Configuring WEP”
on page 2-34
.
•
To configure WPA with RADIUS, see
“Configuring WPA with RADIUS” on page 2-36
.
•
To configure WPA2 with RADIUS, see
“Configuring WPA2 with RADIUS” on
page 2-37
.
•
To configure WPA and WPA2 with RADIUS, see
“Configuring WPA and WPA2 with
RADIUS” on page 2-38
.
•
To configure WPA-PSK, see
“Configuring WPA-PSK” on page 2-39
.
•
To configure WPA2-PSK, see
“Configuring WPA2-PSK” on page 2-40
.
•
To configure WPA-PSK and WPA2-PSK, see
“Configuring WPA-PSK and WPA2-PSK”
on page 2-41
.
8.
Wireless Client Security Separation
is disabled by default. If enabled, the associated
wireless clients will not be able to communicate with each other.
9.
If the hubs/switches on your LAN support the VLAN (802.1Q) standard and this feature has
been enabled, the default
VLAN ID
for WNDAP330 will be associated with each profile. The
default Profile VLAN ID must match the IDs used by other network devices.
10.
Click
Apply
to save your Security Profile settings.
11.
Click
Back
. Your new settings will appear in the Security Profiles table identified by the
Profile Name of the profile. A VLAN ID will also be assigned to your profile.
To enable your Security Profile:
1.
Check the radio box in the
Enable
column next to your profile.
2.
Click
Apply
. Your Security Profile will be enabled. If you enabled VLAN 802.1Q, your
VLAN Profile will also be enabled. (See
“Setting Basic IP Options” on page 2-13
to enable
VLAN 802.1Q.)
Configuring WEP
To configure WEP data encryption:
Note:
Security Profiles that share the same type of network authentication need not
share the same passphrase or keys. Security Profiles that use WEP must share
the same four keys, but they do not need to use the same default key.