Netgear WNDAP330 WNDAP330 User Manual - Page 62
Configuring WPA with RADIUS, Apply, Edit.
UPC - 606449056464
View all Netgear WNDAP330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired computer to make any further changes. Configuring WPA with RADIUS Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings. To configure WPA, follow these steps: 1. Under the Configuration tab, select Security on the main menu, select Advanced from the left- hand menu, and then select RADIUS Server Settings. The RADIUS Server Settings screen will display. 2. Enter the RADIUS Server Settings as shown in "Configuring the RADIUS Server Settings" on page 2-30. 3. Click Apply to save your RADIUS Server settings. 4. Under the Configuration tab, select Security from the main menu, and then select either Security Profile Settings for 802.11b/g/n or 802.11a/n. The screen for the Profile Settings you selected will display. When the Security Profile screen displays, check the radio button of the Security Profile you want to modify and click Edit. Figure 2-18 2-36 v1.0, May 2008 Basic Installation and Configuration