Home » Netgear Manuals » Wireless » Netgear WNDAP330 » Manual Viewer

Netgear WNDAP330 WNDAP330 User Manual - Page 97

Configuring Advanced Wireless Settings

UPC - 606449056464

Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual Configuring Advanced Wireless Settings The Advanced screen of the Wireless Settings menu is used to configure and enable various wireless LAN parameters for both the 11a/n and 11b/g/n modes. The default wireless LAN parameters usually work well. However, you can use these settings to fine tune the overall performance of your wireless access point for your environment. The Wireless Settings option of the Advanced menu is used to configure the Wireless LAN parameters. The default advanced wireless LAN parameter settings usually work well. Configuring 802.11b/g/n Advanced Wireless Settings To configure advanced Wireless Settings: 1. Under the Configuration tab, select Wireless. 2. From the left-hand menu, select Advanced, and then select Wireless Settings. Advanced Configuration 4-5 v1.0, May 2008

Section	Page
NETGEAR WNDAP330 ProSafe 802.11n Dual Band Wireless Access Point Reference Manual	1
Contents	7
About This Manual	11
Conventions, Formats, and Scope	11
How to Use This Manual	12
How to Print This Manual	12
Revision History	13
Chapter 1 Introduction	15
About the ProSafe 802.11n Dual Band Wireless Access Point WNDAP330	15
Key Features and Standards	16
Supported Standards and Conventions	16
Key Features	17
802.11a/b/g/n Standards-based Wireless Networking	18
Autosensing Ethernet Connections with Auto Uplink	19
Compatible and Related NETGEAR Products	19
System Requirements	20
What’s In the Box?	20
Hardware Description	21
Front Panel	22
Rear Panel	24
Chapter 2 Basic Installation and Configuration	27
Wireless Equipment Placement and Range Guidelines	27
Understanding WNDAP330 Wireless Security Options	28
Installing the WNDAP330 Wireless Access Point	30
Setting up the WNDAP330 Wireless Access Point	30
Configuring LAN and Wireless Access	30
Configuring Time Settings	34
Configuring Wireless Access	36
Deploying the WNDAP330 Wireless Access Point	36
Verifying Wireless Connectivity	37
Logging In Using the Default IP Address	38
Setting Basic IP Options	39
Wireless Settings	40
Configuring 802.11b/g/n Wireless Settings	40
Configuring 802.11a/n Wireless Settings	43
Configuring QoS Settings	47
Setting Up and Testing Basic Wireless Connectivity	48
Understanding Security Profiles	49
SSID and WEP/WPA Settings Setup Form	54
802.11b/g/n Configuration	54
802.11a/n Configuration	55
Configuring the RADIUS Server Settings	56
Setting up a Security Profile	58
Configuring WEP	60
Configuring WPA with RADIUS	62
Configuring WPA2 with RADIUS	63
Configuring WPA and WPA2 with RADIUS	64
Configuring WPA-PSK	65
Configuring WPA2-PSK	66
Configuring WPA-PSK and WPA2-PSK	67
Restricting Wireless Access by MAC Address	68
Chapter 3 Management	71
Remote Management	71
Remote Console	72
Using the Secure Telnet Interface	73
CLI Commands	74
Upgrading the Wireless Access Point Software	75
Configuration File Management	77
Saving the Configuration	78
Restoring the Configuration	79
Restoring the WNDAP330 to the Factory Default Settings	79
Changing the Administrator Password	80
Enabling the SysLog Server	81
Using Activity Log Information	82
Viewing General Summary Information	83
Viewing Network Traffic Statistics	85
Viewing Available Wireless Station Statistics	87
Enabling Rogue AP Detection	88
Importing Rogue AP List from a File	90
Viewing Rogue AP Statistics	91
Chapter 4 Advanced Configuration	93
IP Settings for Wireless Clients	93
Hotspot Settings	96
Configuring Advanced Wireless Settings	97
Configuring 802.11b/g/n Advanced Wireless Settings	97
Configuring 802.11a/n Advanced Wireless Settings	99
Configuring Advanced QoS Settings	101
Enabling Wireless Bridging and Repeating	103
Configuring a WNDAP330 as a Point-to-Point Bridge	106
Configuring a Point-to-Multi-Point Wireless Bridge	108
Configuring the WNDAP330 as a Wireless Repeater	110
Chapter 5 Troubleshooting and Debugging	113
No lights are lit on the wireless access point.	113
The Wireless LAN activity light does not light up.	114
The LAN light is not lit.	114
I cannot access the Internet or the LAN with a wireless capable computer.	114
I cannot connect to the WNDAP330 to configure it.	115
When I enter a URL or IP address I get a timeout error.	115
Using the Reset Button to Restore Factory Default Settings	116
Appendix A Default Settings and Technical Specifications	117
Factory Default Settings	117
Technical Specifications	119
Appendix B Related Documents	121
Appendix C Command Line Reference	123
Command Sets	123

Match case Limit results 1 per page

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual

Advanced Configuration

4-5

v1.0, May 2008

Configuring Advanced Wireless Settings

The Advanced screen of the Wireless Settings menu is used to configure and enable various

wireless LAN parameters for both the 11a/n and 11b/g/n modes. The default wireless LAN

parameters usually work well. However, you can use these settings to fine tune the overall

performance of your wireless access point for your environment.

The Wireless Settings option of the Advanced menu is used to configure the Wireless LAN

parameters. The default advanced wireless LAN parameter settings usually work well.

Configuring 802.11b/g/n Advanced Wireless Settings

To configure advanced Wireless Settings:

Under the Configuration tab, select Wireless.

From the left-hand menu, select Advanced, and then select Wireless Settings.