Home » Netgear Manuals » Modems » Netgear WNR3500v2 » Manual Viewer

Netgear WNR3500v2 WNR3500v2 User Manual - Page 84

Setting Up a Repeater Unit, Enable Wireless Repeating Function, Repeater IP Address

Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500v2 User Manual Setting Up a Repeater Unit Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless connection to the base station. Note: If you are using the WNR3500v2 router base station with a different model wireless router as the repeater, you might need to change additional configuration settings. In particular, you should disable the DHCP server function on the wireless repeater AP. To configure a WNR3500v2 router as a repeater unit: 1. If you are using the same model of wireless router for both the base station and repeaters, you must change the LAN IP address for each repeater to a different IP address in the same subnet (see "Using the LAN IP Setup Options" on page 5-1). Note: Failing to change the LAN IP address will cause an IP address conflict in the network because the factory default LAN IP is the same for both units. 2. Check the Wireless Settings screen, and verify that the wireless settings match the base unit exactly. The wireless security option must be set to WEP or None. 3. In the Wireless Repeating Function screen, select the Enable Wireless Repeating Function check box. In the Repeater IP Address field, the router's IP address is automatically filled in. This IP address must be in the same subnet as the base station but different from the LAN IP of the base station. 4. Fill in the Base Station MAC Address field. 5. Click Apply to save your changes. 6. Verify connectivity across the LANs. A computer on any wireless or wired LAN segment of the wireless router should be able to connect to the Internet or share files and printers with any other wireless or wired computer or server connected to the other AP. 5-24 v1.0, May 2009 Customizing Your Network Settings

Section	Page
NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500v2 User Manual	1
Contents	7
About This Manual	11
Conventions, Formats, and Scope	11
How to Print This Manual	12
Revision History	12
Chapter 1 Configuring Your Internet Connection	13
Using the Setup Manual	13
Logging In to Your Wireless Router	14
Using the Setup Wizard	17
Viewing or Manually Configuring Your ISP Settings	17
Chapter 2 Safeguarding Your Network	21
Planning Your Wireless Network	21
Wireless Placement and Range Guidelines	22
Wireless Security Options	23
Manually Configuring Your Wireless Settings	24
Configuring WEP Wireless Security	26
Configuring WPA, WPA2, or WPA/WPA2 Wireless Security	28
Using Push ‘N’ Connect to Configure Your Wireless Network	29
Using the WPS Button to Configure Your Network and Add a Client	30
Using a PIN to Configure Your Network and Add a Client	31
Configuring Advanced WPS Settings	33
Adding Both WPS-Capable Clients and Non-WPS-Capable Clients	34
Restricting Access to Your Router	35
Chapter 3 Protecting Your Network	37
Protecting Access to Your WNR3500v2 Router	37
Changing the Built-In Password	38
Restricting Access by MAC Address	39
Blocking Access to Internet Sites	40
Blocking Access to Internet Services	42
Configuring a User-Defined Service	43
Scheduling Blocking	44
Viewing Logs of Web Access or Attempted Web Access	45
Configuring E-mail Alert and Web Access Log Notifications	46
Setting the Time	47
Chapter 4 Using Network Monitoring Tools	49
Upgrading the Router Firmware	49
Upgrading Automatically to New Router Software	51
Upgrading Manually to New Router Software	51
Viewing Wireless Router Status Information	52
Viewing a List of Attached Devices	57
Managing the Configuration File	57
Backing Up and Restoring the Configuration	58
Erasing the Configuration	59
Enabling Remote Management Access	59
Chapter 5 Customizing Your Network Settings	61
Using the LAN IP Setup Options	61
Using the Router as a DHCP Server	64
Using Address Reservation	64
Using a Dynamic DNS Service	65
Configuring the WAN Setup Options	67
Setting Up a Default DMZ Server	68
Configuring Static Routes	69
Allowing Inbound Connections to Your Network	71
How Your Computer Accesses a Remote Computer through Your Router	71
How Port Triggering Changes the Communication Process	73
How Port Forwarding Changes the Communication Process	74
How Port Forwarding Differs from Port Triggering	75
Configuring Port Forwarding to Local Servers	76
Adding a Custom Service	77
Editing or Deleting a Port Forwarding Entry	78
Configuring Port Triggering	78
Wireless Repeating (Also Called WDS)	81
Wireless Repeating Function	82
Setting Up the Base Station	83
Setting Up a Repeater Unit	84
Chapter 6 Fine-Tuning Your Network	85
Assessing Your Speed Requirements	86
Optimizing Your Network Bandwidth	87
Optimizing Wireless Performance	89
Changing the MTU Size	90
Quality of Service	91
Using WMM QoS for Wireless Multimedia Applications	92
Configuring QoS for Internet Access	92
Using Universal Plug and Play	97
Chapter 7 Troubleshooting	99
Quick Tips	99
Troubleshooting Basic Functions	101
Cannot Access the Router Main Menu	103
Cannot Access the Internet	104
Troubleshooting a Network Using the Ping Utility	106
Testing the LAN Path to Your Router	106
Testing the Path from Your Computer to a Remote Device	107
Problems with Date and Time	108
Wireless Connectivity	108
Using Your Wireless Card Setup Program	109
Setting Up and Testing Basic Wireless Connectivity	109
Restoring the Default Configuration and Password	112
Appendix A Default Configuration and Technical Specifications	113
Technical Specifications	115
Appendix B Related Documents	117

Match case Limit results 1 per page

NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500v2 User Manual

5-24

Customizing Your Network Settings

v1.0, May 2009

Setting Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless

connection to the base station.

To configure a WNR3500v2 router as a repeater unit:

If you are using the same model of wireless router for both the base station and repeaters, you

must change the LAN IP address for each repeater to a different IP address in the same subnet

(see

“Using the LAN IP Setup Options” on page 5-1

Check the Wireless Settings screen, and verify that the wireless settings match the base unit

exactly. The wireless security option must be set to

WEP

None

In the Wireless Repeating Function screen, select the

Enable Wireless Repeating Function

check box.

In the

Repeater IP Address

field, the router’s IP address is automatically filled in. This IP

address must be in the same subnet as the base station but different from the LAN IP of the

base station.

Fill in the

Base Station MAC Address

field.

Click

Apply

to save your changes.

Verify connectivity across the LANs.

A computer on any wireless or wired LAN segment of the wireless router should be able to

connect to the Internet or share files and printers with any other wireless or wired computer or

server connected to the other AP.

Note:

If you are using the WNR3500v2 router base station with a different model

wireless router as the repeater, you might need to change additional configuration

settings. In particular, you should disable the DHCP server function on the wireless

repeater AP.

Note:

Failing to change the LAN IP address will cause an IP address conflict in the

network because the factory default LAN IP is the same for both units.