Netgear XAV5004 XAV5004 User Manual - Page 21
Troubleshooting, Product Registration, Support, and Documentation, Basic Functioning
View all Netgear XAV5004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3. Troubleshooting 3 This chapter provides information about troubleshooting your XAV5004 Powerline AV 500 Adapter. Product Registration, Support, and Documentation Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at http://www.netgear.com/register. Registration is required before you can use our telephone support service. Registration via our website is strongly recommended. Product updates and Web support are always available at: http://support.netgear.com. When the Powerline adapter is connected to the Internet, click the Knowledge Base or the Documentation link under the Web Support menu to view support information or the documentation for the Powerline adapter. Basic Functioning After you turn on power to the XAV5004 devices, the following sequence of events should occur: 1. When power is first applied, verify that the Power light is on. 2. After approximately 10 seconds, verify that: a. The power LED is solid green. b. The Powerline LED is lit. c. The Ethernet LED on the Powerline AV 500 Adapter lights or blinks. If any of these conditions does not occur, refer to the appropriate following section. Power LED Not On Make sure that, if power to the AC power outlet is controlled by a wall switch, the wall switch is in the on position. Chapter 3. Troubleshooting | 21