Nikon 25547 User Manual - Page 79
Wireless Network Settings, Camera to Computer Ad-hoc
![]() |
UPC - 018208255474
View all Nikon 25547 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Wireless Network Settings The Wireless Camera Setup Utility may require information on some or all of the following wireless network settings: Item Description Network Name (SSID) Enter a name for the wireless network or choose from a list of existing (required) networks. Do not change the name if it is supplied automatically . • Camera to Computer (Ad-hoc): The network is ad-hoc if it consists only of Type the camera and the computer. (required) • Access Point (Infrastructure): Infrastructure networks include a wireless ac- cess point connected to a local-area network. Channel The channel used for peer-to-peer wireless communication (ad-hoc networks only). Choose from channels 1-11. The type of authentication used by the computer or access point. The Authentication camera supports WPA-PSK (infrastructure mode only), open system, and shared key authentication. The type of encryption (if any) used on the network. Depending on the authentication used, the following types of encryption are available: Security • Open: none, WEP 64-bit, WEP 128-bit • Shared: WEP 64-bit, WEP 128-bit • WPA-PSK: TKIP Security Key Format If the network uses WEP encryption, note whether the key is base 16 (uses only the numbers 0-9 and the letters a-f ) or ASCII. Security Key If the network uses TKIP or WEP encryption, enter the network key. Key Index In infrastructure networks that use WEP encryption, enter the host or access point key index. The default index is 1. Configure Note whether the network is configured to supply IP address automati- (required) cally (the default setting) or manually. IP address If the network is configured for manual IP addresses, enter the IP address that will be assigned to the camera. Wireless Transfer and Printing MAC Address Filtering If the wireless network uses MAC address filtering, you will need to supply the filter with the camera's MAC address. Choose Firmware version from the camera setup menu ( 89) and note the camera MAC address. Port Numbers The camera uses UDP port 5353 and TCP port 15740. If you are using a firewall, you will need to configure it to leave these ports open. 69
![](/manual_guide/products/nikon-25547-user-manual-daf3b70/79.png)