Nikon 9238 Super Coolscan LS5000 ED / Coolscan V ED User's Manual - Page 34
Step 2 - Insert an Adapter
UPC - 018208092383
View all Nikon 9238 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Step 2-Insert an Adapter The adapters provided with the SUPER COOLSCAN 5000 ED and COOLSCAN V ED can be used to scan 35-mm film mounted as individual slides or in strips of two to six frames. 1 Choose an adapter To scan Choose 35-mm film in strips of two to six frames SA-21 strip film adapter 35-mm slides (one slide at a time) MA-21 slide mount adapter 2 Check the status LED Make sure that the status LED is glowing steadily. Do not insert adapters or film while the status LED is blinking. 3 Insert the adapter Slide the adapter into the adapter slot. When the adapter is fully inserted, the status LED will blink for about 30 seconds (5000 ED) or 20 seconds (COOLSCAN V ED). SA-21 strip film adapter MA-21 slide mount adapter Removing Adapters Before removing adapters from the scanner, eject the film or slide ( has stopped blinking. Remove adapters as shown. SA-21 strip film adapter 38) and check that the status LED MA-21 slide mount adapter Optional Holders and Adapters Optional adapters and film holders are available for a variety of film, including single-frame strips of 35mm film, APS (IX-240) film cartridges, glass microscope slides, and rolls of developed 35-mm film up to forty frames in length (5000 ED only). See "Optional Holders and Adapters" ( 48). 25