Nikon 9238 Super Coolscan LS5000 ED / Coolscan V ED User's Manual - Page 47

Step 9-Eject and Exit 1 Eject the film SA - 21 To eject film from the SA-21 strip-film adapter, click the eject button in the control area of the scan window. Ejection is complete when the status LED has stopped blinking. Eject button Ejecting Film from the SA-21 Always use the scan window eject button when ejecting film from the SA-21. Wait until ejection is complete before removing film by hand. Pulling on the film during ejection could damage the film or cause errors. For information on what to do if film jams in the SA-21, see "Film Feed Errors (SA-21)" ( 60). If the scan window was closed before the film was ejected, turn the scanner off and then on again. The film will be ejected automatically. MA - 21 Confirm that the status LED is not blinking and press the eject button on the front of the adapter to eject the slide. 2 Exit the host application Select Exit (Windows) or Quit (Mac OS 9) from the File menu. In Mac OS X, open the application menu and choose the "Quit" option for the host application. 3 Turn the scanner off Leave an Adapter in Place To prevent dust from entering the scanner, be sure the MA-21 or SA-21 is in the adapter slot when the scanner is off. Scanner on Scanner off The SA-21 Lock Mechanism If the scanner is turned off with film still in place, the adapter lock mechanism ( 29) will prevent the SA-21 from being removed. Before attempting to remove the SA-21, turn the scanner on and wait for the film to be ejected automatically. Attempting to remove the adapter without first ejecting the film could interfere with the connection between the adapter and the scanner. If an attempt has been made to remove the SA-21 without ejecting the film, push the adapter back into the scanner to re-establish the connection. Attempting to remove the adapter by force could damage the adapter or scanner. Remove Film Holders When using the optional FH-3 film holder ( 50), remove the holder before turning the scanner off. 38