Nikon 9437 User Manual - Page 26
Adjusting Viewfinder Focus, focus brackets are in sharp focus. - lens
View all Nikon 9437 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Adjusting Viewfinder Focus Photographs are framed in the viewfinder. Before shooting, make sure that the display in the viewfinder is in clear focus. 1 Remove the lens cap and turn the camera on. 2 Slide the diopter adjustment control up and down until the focus brackets are in sharp focus. When operating the diopter adjustment control with your eye to the viewfinder, be careful not to put your fingers or fingernails in your eye. Focus brackets Auto Meter Off At default settings, the viewfinder and shooting information display will turn off if no operations are performed for about eight seconds (auto meter off ), reducing the drain on the battery. Press the shutter-release button halfway to reactivate the display in the viewfinder. 8s Exposure meters on Exposure meters off Exposure meters on The length of time before the exposure meters turn off automatically can be adjusted using Custom Setting 15 (Auto off timers; 78). 14 Introduction: First Steps