Nikon COOLPIX 5000 Instruction Manual - Page 125

Taking Photographs-Advanced Photography Noise Reduction When NOISE REDUCTION is on or set to Clear Image Mode ( 128), CONTINUOUS is automatically set to Single, and the options in the CONTINUOUS menu are disabled. Movie/Ultra HS Settings of Movie and Ultra HS only take effect when the monitor is on. If the monitor is turned off, the camera will revert to a setting of Single until the monitor is turned on. If the monitor is swivelled to point in the same direction as the lens, the display in the monitor will be inverted. Using Zoom while Recording Movies In Movie mode, optical zoom can only be adjusted before recording begins. Digital zoom can also be adjusted before recording in the range 1.2 × to 2.0 × (values of more than 2.0 × are not available in Movie mode). Once recording has started, pressing the zoom button triggers digital zoom, even if Off has been selected in the setup Zoom Options > Digital Tele menu ( 151). The zoom settings available in Movie mode are summarized in the following table: Before recording During recording Optical zoom Can be adjusted normally. Fixed at position selected before recording. Digital 1.2 - 2.0 × from maximum opti- Up to 2.0 × from current optical zoom cal zoom position. zoom position.* * If digital zoom was in effect before recording began, digital zoom can be adjusted freely up to 2.0 × from the maximum optical zoom position. Viewing the Current Continuous Setting At settings other than Single, the current "continuous" setting is indicated by an icon in the monitor. 111