Nikon COOLPIX AW130 Product Manual - Page 198

Display No access. Could not connect. Wi-Fi connection terminated. Lens error. Try again after turning the camera off and on. Communications error System error Cause/Solution A The camera could not receive the signal from the smart device. Establish the wireless connection again. • Press the Z (Wi-Fi) button. • Touch an NFC-compatible smart device to the camera. • Select Connect to smart device in the Wi-Fi options menu. 108, 147 The camera failed to establish the connection while receiving the signals from the smart device. Set a different channel in Channel under Options in the Wi-Fi options menu, and establish the wireless connection again. 108, 147 The Wi-Fi connection is disconnected in the following situations: • When the reception is poor • When the battery level is low • When a cable is connected or disconnected, or a memory card is removed or inserted Use a fully charged battery, disconnect the TV, computer, and printer from the camera, and establish the wireless connection again. 108, 147 If the error persists, contact your retailer or Nikon-authorized service 170 representative. An error occurred while communicating with the printer. Turn the camera off and reconnect the 153 USB cable. An error occurred in the camera's internal circuitry. Turn the camera off, remove and reinsert the battery, and turn the camera on. If the 170 error persists, contact your retailer or Nikon-authorized service representative. Technical Notes 168