Nikon COOLPIX AW130 Product Manual - Page 200
Troubleshooting, Power, Display, Settings Issues
View all Nikon COOLPIX AW130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Problem Cause/Solution A The camera is on but does not respond. Wait for recording to end. If the problem persists, turn the camera off. If the camera does not turn off, remove and reinsert the battery or batteries or, if you are using an AC adapter, disconnect and reconnect the AC adapter. - Note that although any data currently being recorded will be lost, data that have already been recorded will not be affected by removing or disconnecting the power source. The camera cannot be turned on. • The battery is exhausted. • The power switch is enabled a few seconds after the battery is inserted. Wait a few seconds before pressing the power switch. 6, 8, 162 - • The camera automatically turns off to save power 13 (auto off function). The camera turns • The camera and battery may not work properly at 161 off without low temperatures. warning. • The inside of the camera has become hot. Leave - the camera off until the inside of the camera has cooled, and then try turning it on again. The monitor is blank. • The camera is off. 10 • The camera automatically turns off to save power 13 (auto off function). • The flash lamp flashes while the flash is charging. - Wait until charging is complete. • The camera is connected to a TV or computer. - • The camera and smart device are connected - using a Wi-Fi connection and the camera is being operated by remote control. The camera becomes hot. The camera may become hot when used for an extended period of time to shoot movies or when - used in a hot environment; this is not a malfunction. Technical Notes 170