Nikon COOLPIX AW130 Product Manual - Page 215
lock screw of the bracket to, Fully tighten the case/adapter
View all Nikon COOLPIX AW130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
4 Attach the underwater fiber-optic cable to the cable adapter. • Connect the end of the cable with the longer straight section (the end that connects to SR-CP10A) to the cable adapter's fiber-optic connector. • After connecting, pass the cable through the adapter's two cable holders. 5 Slide the cable adapter that is attached to the camera and cable until it contacts the stay mounting guide. • Make sure that the cable does not come loose from the cable holders. 6 Fully tighten the case/adapter lock screw of the bracket to secure the cable adapter. 7 Pass the underwater fiber-optic cable through the grip of the bracket, from bottom to top. 185 Technical Notes
Technical Notes
185
4
Attach the underwater fiber-optic
cable to the cable adapter.
•
Connect the end of the cable with the
longer straight section (the end that
connects to SR-CP10A) to the cable
adapter’s fiber-optic connector.
•
After connecting, pass the cable through
the adapter’s two cable holders.
5
Slide the cable adapter that is
attached to the camera and cable
until it contacts the stay
mounting guide.
•
Make sure that the cable does not come
loose from the cable holders.
6
Fully tighten the case/adapter
lock screw of the bracket to
secure the cable adapter.
7
Pass the underwater fiber-optic
cable through the grip of the
bracket, from bottom to top.