Nikon COOLPIX W100 Reference Manual - English - Page 157

Troubleshooting, Power, Display, Settings Issues

Page 157 highlights

Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Problem Cause/Solution A • Wait for recording to end. • If the problem persists, turn the camera off. If the camera does not turn off, remove and reinsert The camera is on but does not respond. the battery or batteries or, if you are using an AC adapter, disconnect and reconnect the AC adapter. - Note that although any data currently being recorded will be lost, data that have already been recorded will not be affected by removing or disconnecting the power source. The camera cannot be turned on. The battery is exhausted. 11, 13, 129 • The camera automatically turns off to save power 25 (auto off function). The camera turns off without warning. • The camera and battery may not work properly at low temperatures. • The inside of the camera has become hot. Leave the 129 - camera off until the inside of the camera has cooled, and then try turning it on again. • The camera is off. 15 • The camera automatically turns off to save power 25 (auto off function). The monitor is blank. • The flash lamp flashes while the flash is charging. Wait until charging is complete. - • The camera is connected to a TV or computer. - • The camera is shooting while Choose a style is set to - Add light trails. The camera becomes hot. The camera may become hot when used for an extended period of time such as to shoot movies, or when used in a hot environment; this is not a - malfunction. 137 Technical Notes Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175

137
Technical Notes
Troubleshooting
If the camera fails to function as expected, check the list of common problems below
before consulting your retailer or Nikon-authorized service representative.
Power, Display, Settings Issues
Troubleshooting
Problem
Cause/Solution
A
The camera is on but
does not respond.
Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert
the battery or batteries or, if you are using an AC
adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being
recorded will be lost, data that have already been
recorded will not be affected by removing or
disconnecting the power source.
The camera cannot
be turned on.
The battery is exhausted.
11, 13,
129
The camera turns off
without warning.
The camera automatically turns off to save power
(auto off function).
The camera and battery may not work properly at low
temperatures.
The inside of the camera has become hot. Leave the
camera off until the inside of the camera has cooled,
and then try turning it on again.
25
129
The monitor is blank.
The camera is off.
The camera automatically turns off to save power
(auto off function).
The flash lamp flashes while the flash is charging.
Wait until charging is complete.
The camera is connected to a TV or computer.
The camera is shooting while
Choose a style
is set to
Add light trails
.
15
25
The camera
becomes hot.
The camera may become hot when used for an
extended period of time such as to shoot movies, or
when used in a hot environment; this is not a
malfunction.