Nikon COOLPIX W100 Reference Manual - English - Page 37
location information to the, images that you take.
![]() |
View all Nikon COOLPIX W100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4 Check the authentication code. • After confirming that the camera and smart device display the same six-digit Auth. code 000000 authentication code, follow the steps below to complete pairing (note that the code may not be displayed in some versions of iOS, but you should follow Confirm that the same authentication code is displayed on the smart device and press OK. the steps below even if the code is not displayed). Camera - On the camera, press flexible button 4 (O). - On the smart device, tap Pairing (the name of the button varies with the smart device). 5 Press flexible button 4 (A) when the dialog at right is displayed. • When a constant connection between the camera and smart device is established, the dialog at right is displayed. Your camera and smart device are connected! SnapBridge will send your photos to your smart device as they are taken. • If the camera displays Could not connect., press flexible button 3 (R Reconnect) to return to Step 3. To cancel pairing settings, press flexible button 4 (S Cancel). 6 Select whether to add shooting location information to the images that you take. Download location data from smart device? • To record location data with photographs, select flexible button 3 Yes (R Yes) when prompted and enable No the location data features both in the SnapBridge app and on the smart device itself (for more information, see the documentation provided with the smart device). 17 Getting Started Camera Setup
![](/manual_guide/products/nikon-coolpix-w100-reference-manual-english-5428c6a/37.png)