Nikon D5300 Reference Manual - Page 220
Flicker Reduction, Acquire Image Dust Off reference data.
View all Nikon D5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
3 Acquire Image Dust Off reference data. Press the shutter-release button the rest of the way down to acquire Image Dust Off reference data. If the reference object is too bright or too dark, the camera may be unable to acquire Image Dust Off reference data and the message shown at right will be displayed. Choose another reference object and repeat the process from step 1. D Image Dust Off Reference Data The same reference data can be used for photographs taken with different lenses or at different apertures. Reference images can not be viewed using computer imaging software. A grid pattern is displayed when reference images are viewed on the camera. Flicker Reduction G button ➜ B setup menu Reduce flicker and banding when shooting under fluorescent or mercury-vapor lighting during live view (0 118) or movie recording (0 126). Choose Auto to allow the camera to automatically choose the correct frequency, or manually match the frequency to that of the local AC power supply. A Flicker Reduction If Auto fails to produce the desired results and you are unsure as to the frequency of the local power supply, test both options and choose the one that produces the best results. Flicker reduction may not produce the desired results if the subject is very bright, in which case you should select mode A or M and choose a smaller aperture (higher f-number) before starting live view. Note that flicker reduction is not available when On is selected for Movie settings > Manual movie settings (0 129) in mode M. 200 B The Setup Menu: Camera Setup