Nikon Zoom 90 QD Instruction Manual - Page 10
Pull the film leader out to the red index, mark., Close the camera back, and check that, the film
UPC - 018208018710
View all Nikon Zoom 90 QD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Loading the film (continued) 3. Pull the film leader out to the red index mark. Hold the film cartridge and ensure film is properly positioned with no slack. 4. Close the camera back, and check that the film has been correctly loaded. Once the camera back is closed, the film automatically advances to the first frame. Until film loading is complete, " " blinks on the LCD panel. When the film has been properly set, " " is displayed on the LCD panel. If the letter " " blinks on the LCD panel, film is not properly installed. Open the camera back again and reload film. 10 Preparations
10
Preparations
3.
Pull the film leader out to the red index
mark.
Hold the film cartridge and ensure film is properly positioned
with no slack.
4.
Close the camera back, and check that
the film has been correctly loaded.
Once the camera back is closed, the film automatically
advances to the first frame. Until film loading is complete,
“
” blinks on the LCD panel.
When the film has been properly set, “
” is displayed on the
LCD panel.
If the letter “
” blinks on the LCD panel, film is not properly
installed. Open the camera back again and reload film.
Loading the film (continued)