Nokia Car Kit CK-100 User Guide - Page 20

After you have connected the ISO cable, connect the external input

Get Nokia Car Kit CK-100 PDF manuals and user guides View all Nokia Car Kit CK-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Installation • Unplug the appropriate cables from the car radio, and insert the ISO cable plug instead. Connect the open ends of the cables to the car radio speakers. • Connect one of the wires labelled Mute 1, Mute 2, or Mute 3 on the car radio to the ISO cable. Leave the other mute wires connected as they are. • Insert the power cable plug of the ISO cable to the respective connector on the hands-free unit. • Check the +12-V power pin and the ignition pin on the car radio and the respective pins of the ISO cable. If necessary, swap the pins on the fuses of the ISO cable. Plug the ISO cable to the two open ISO connectors. 2. Plug the ISO cable to the respective connector on the hands-free unit. After you have connected the ISO cable, connect the external input device CU-11 and the microphone MP-2 to the respective connectors on the hands-free unit. To charge a compatible Nokia mobile phone through the car kit, connect one end of the supplied charging cable CA-134 to the hands-free unit and the other end to the 2.0-mm (0.08 inch) charging connector of the phone. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
Installation
20
•
Unplug the appropriate cables from the car radio, and insert the
ISO cable plug instead. Connect the open ends of the cables to
the car radio speakers.
•
Connect one of the wires labelled Mute 1, Mute 2, or Mute 3 on
the car radio to the ISO cable. Leave the other mute wires
connected as they are.
•
Insert the power cable plug of the ISO cable to the respective
connector on the hands-free unit.
•
Check the +12-V power pin and the ignition pin on the car radio
and the respective pins of the ISO cable. If necessary, swap the
pins on the fuses of the ISO cable. Plug the ISO cable to the two
open ISO connectors.
2.
Plug the ISO cable to the respective connector on the hands-free unit.
After you have connected the ISO cable, connect the external input
device CU-11 and the microphone MP-2 to the respective connectors on
the hands-free unit.
To charge a compatible Nokia mobile phone through the car kit, connect one
end of the supplied charging cable CA-134 to the hands-free unit and the
other end to the 2.0-mm (0.08 inch) charging connector of the phone.