Nokia Car Kit CK-100 User Guide - Page 23
Install the car kit in a vehicle, end to the 2.0-mm 0.08 inch charging connector of the mobile phone.
View all Nokia Car Kit CK-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installation 1. Connect the respective wires of the power cable PCU-4 to the car battery and ignition sense (if available). Connect the car radio mute wire (if available) to the car radio. 2. Plug the power cable to the respective connector on the hands-free unit. 3. Connect the loudspeaker SP-3 to the respective connector on the hands-free unit. 4. Connect the stereo outputs of the hands-free unit to the AUX input of the car radio. Use an appropriate cable specific to your car radio (this cable is not supplied with the car kit). After you have made all the connections, connect the external input device CU-11 and the microphone MP-2 to the respective connectors on the hands-free unit. To charge a compatible Nokia mobile phone through the car kit, connect one end of the charging cable CA-134 to the hands-free unit and the other end to the 2.0-mm (0.08 inch) charging connector of the mobile phone. ■ Install the car kit in a vehicle This section describes how to install the car kit parts in a vehicle. The parts are explained in "Parts," p. 6. When installing the parts of the car kit, ensure that none of them interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle (for example, airbags). Example of appropriate installation 23