Nokia IP350 Installation Guide - Page 29
Connecting Power and Turning the Power
View all Nokia IP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Connecting Power and Turning the Power On Caution Blocking ventilation openings during installation may result in damage to the appliance. Connecting Power and Turning the Power On The power plug and power switch for the 60s and 100s appliances are located on the back of the appliance as Figure 9 shows. Note The Nokia 60s and 100s appliance power supplies automatically detect the input voltage (115VAC [90 to 132] or 220VAC [180 to 264]) and configure themselves appropriately. Figure 9 Back Panel Power Switch 00249 Power switch Power plug To connect the power supply 1. Connect the power cord securely into the power socket on the back of the appliance. 2. Plug the other end of the cord into a three-wire grounded power strip or wall outlet. 3. Press the power supply switch to the "on" position to activate the 60s and 100s appliance. Nokia 60s and 100s Installation Guide 29