Nokia IP350 Installation Guide - Page 72
Variables
View all Nokia IP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
7 Using the Boot Manager the hard-disk drive. You can set these values by using boot manager commands. This chapter describes the boot manager commands. Variables A number of variables are stored by the boot manager in nonvolatile memory. You can set and view most variables from the boot manager prompt. The following sections describe how to view and set the variables. The variables are: Table 4 Boot manager variables Variable Description boot manager The version number of the boot manager. This variable revision cannot be set from the command line. autoboot If autoboot is set to no, the 60s or 100s appliance stops at the boot manager command line during the boot process. If autoboot is set to yes, the 60s or 100s appliance does not stop at the boot manager command line during a boot up. It does wait for the amount of time specified in bootwait for input from the keyboard. If input is received, the boot manager goes to the command line; otherwise, it proceeds with the boot up. Factory default: yes. bootwait The amount of time, in seconds, that the boot manager waits for input during a boot up when autoboot is set to yes. Factory default: five seconds. 72 Nokia 60s and 100s Installation Guide