Nokia IP350 Installation Guide - Page 52
Installing a PCMCIA Modem
View all Nokia IP350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
6 Installing and Replacing Other Components Installing a PCMCIA Modem The 60s and 100s appliances support a PCMCIA modem card that allows you to set the country code through Voyager. For information about the country codes, see the Voyager Reference Guide. Note The 60s and 100s support Ositech Five of Clubs and Ositech Five of Clubs II PCMCIA modems. Nokia recommends that you purchase your modem only from Nokia or authorized resellers. For further information, contact the appropriate Nokia customer support site listed "Nokia Contact Information" on page 3. To use a modem with a 60s or 100s appliance 1. If the modem is not already installed, insert the PCMCIA modem into either the top or bottom PCMCIA slot until the modem clicks into place. 60s PCMCIA Slots 00487 The modem and the ejector tab on the left of the slot protrude from the unit. The appliance automatically recognizes the modem. 2. Connect the modem to a phone line. Use the appropriate cable for the modem and telephone system in the country in which the device is used. To configure IPSO to allow logins through the modem, click Config on the Home page in Voyager and then click on the Network Access and Services link in the Security and Access Configuration section. 52 Nokia 60s and 100s Installation Guide