NordicTrack 1750 Instruction Manual - Page 12
The connectors should slide, together easily and snap into place., start all four Screws, and then
View all NordicTrack 1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. With the help of a second person, hold the console assembly (H) near the Handrails (74). Connect the Upright Wire (83) to the console wire (J). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Then, remove any wire ties (K) from the Upright Wire (83). 11 H J 83 74 K 12. Attach the console assembly (H) to the Handrails (74) with four 5/16" x 2" Screws (2) and four 12 5/16" Star Washers (8); start all four Screws, and then tighten them. Be careful not to pinch the wires (J). Insert the wires (J) into the top of the Right Upright (84). 74 J 8 84 2 H 74 8 2 12
12
11.
With the help of a second person, hold the con-
sole assembly (H) near the Handrails (74).
Connect the Upright Wire (83) to the con-
sole wire (J).
The connectors should slide
together easily and snap into place.
If they do
not, turn one connector and try again.
Then, remove any wire ties (K) from the Upright
Wire (83).
83
H
J
K
11
74
12.
Attach the console assembly (H) to the Handrails
(74) with four 5/16" x 2" Screws (2) and four
5/16" Star Washers (8);
start all four Screws,
and then tighten them. Be careful not to
pinch the wires (J).
Insert the wires (J) into the top of the Right
Upright (84).
12
2
8
H
8
2
74
74
J
84