NordicTrack 1750 Instruction Manual - Page 25
How To Use The Maintenance
View all NordicTrack 1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
HOW TO USE THE EQUIPMENT SETTINGS SECTION 1. Select the settings main menu. 3. Update the console firmware. For the best results, regularly check for firmware updates. See step 1 at the left. 2. Select the equipment settings section. Touch the Update button to check for firmware updates using your wireless network. The update will begin automatically. In the settings main menu, scroll to the Equipment Settings section. Note: Slide or flick the screen to scroll up or down through the options if necessary. To avoid damaging the treadmill, do not turn off the power or remove the key while the firmware is being updated. 3. Customize the unit of measurement and other settings. To customize the unit of measurement, the timezone, or other settings, touch the desired category, and then touch the toggle button at the side of the category name. The screen will show the progress of the update. When the update is complete, the treadmill will turn off and then turn back on. If it does not, press the power switch into the off position, wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. 4. View machine information. Touch the Machine Info button to view information about your treadmill. After you view the information, touch the back button on the screen. 5. Exit the equipment settings section. To exit the equipment settings section, touch the back button on the screen. HOW TO USE THE MAINTENANCE SECTION 1. Select the settings main menu. See step 1 on page 24. 2. Select the maintenance section. In the settings main menu, scroll to the Maintenance section. Note: Occasionally, a firmware update may cause the console to function slightly differently. These updates are always designed to improve your exercise experience. 4. Calibrate the incline system of the treadmill. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. Touch the Cancel button to return to the maintenance section. When the incline system is calibrated, touch the Finish button. IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline system is calibrating. In an emergency, pull the key from the console to stop the incline calibration. 5. Exit the maintenance section. To exit the maintenance section, touch the back button on the screen. 25