NordicTrack A.c.t. 10 Elliptical English Manual - Page 25

HOW TO USE THE EQUIPMENT SETTINGS MODE 1. Select the settings main menu. Turn on the console and select the main menu (see steps 1 and 2 on page 20). Then, touch the gears button at the bottom of the screen to select the settings main menu. Note: You can also press the center button on the console to select the settings main menu. passcode of your choice. Touch Save to use this passcode. Touch Cancel to return to the equipment settings mode and not use a passcode. To disable the passcode, touch the Disable checkbox. Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct passcode is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985. 2. Select the equipment settings mode. 7. Enable or disable the Internet browser. In the settings main menu, touch the Equipment Settings button. Note: It may be necessary to scroll the screen to view all the menu options. 3. Select a language. To select a language, touch the Language button and select the desired language. Note: This feature may not be enabled. To enable or disable the Internet browser, first touch the Browser button. Next, touch the Enable checkbox or the Disable checkbox. Then, touch the back button on the screen. 8. Select the unit of measurement. Touch the US/Metric button to view the selected unit of measurement. Next, touch the checkbox for the desired unit of measurement. Then, touch the back button on the screen. 4. Select a time zone. 9. Select an update time. To select a time zone, touch the Timezone button and select the desired time zone. Then, touch the back button on the screen. 5. Turn on or turn off the display demo mode. The console features a display demo mode, designed to be used if the elliptical is displayed in a store. While the demo mode is turned on, the screen will show a demo presentation. To select a time for automatic console updates, touch the Update Time button and select the desired time. Then, touch the back button on the screen. IMPORTANT: You must still unplug the power cord after using your elliptical. Set the update time for a time when you normally use your elliptical and will be available to unplug the power cord after an update. To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox. Then, touch the back button on the screen. 6. Enable or disable a passcode. The console features a child safety passcode, designed to prevent unauthorized users from using the elliptical. Touch the Passcode button. To enable a passcode, touch the Enable checkbox. Then, enter a 4-digit 10. Enable or disable street view. During some workouts, the screen may show a map. To enable or disable the street view feature of the maps, first touch the Street View button. Next, touch the Enable checkbox or the Disable checkbox. Then, touch the back button on the screen. 11. Exit the equipment settings mode. To exit the equipment settings mode, press the back button on the console or touch the back button on the screen. 25