NordicTrack A.c.t. 10 Elliptical English Manual - Page 8
Assembly
View all NordicTrack A.c.t. 10 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 7. • In addition to the included tool(s), assembly requires the following tool(s): one Phillips screwdriver one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.nordictrackservice.com/ registration on your computer and register 1 your product. • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Care (see the front cover of this manual) and register your product. 2. Remove the four screws and the four shipping brackets (only one of each is shown) from the 2 Frame (1). Discard the screws and the shipping brackets. Then, tighten the four Leveling Feet (52) (only one is shown) into the underside of the Frame (1). 1 8 52 Shipping Bracket Screw