NordicTrack Audio Rider R400 Bike English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench screwdriver . and Phillips Use the part drawings below to identify the small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached. M4 x 16mm M6 Washer M8 Split M4 x 12mm Round Head M6 x 16mm Button (75)-10 Washer (55)-14 Screw (85)-1 Screw (80)-6 Screw (81)-4 M6 x 28mm Button Screw (67)-6 M6 x 30mm Button Screw (37)-4 M8 x 16mm Button M8 x 19mm Button Screw (54)-6 Screw (77)-4 M8 x 50mm Button Screw (52)-4 M10 x 63mm Bolt Set (62)-1 1. Orient the Left Front Stabilizer (15) with the Wheel (17) positioned as shown. Attach the Left Front Stabilizer to the left side of the Frame (1) with three M8 x 16mm Button Screws (54) and three M8 Split Washers (55). 1 17 15 Attach the Right Front Stabilizer (not shown) to the right side of the Frame (1) in the same way. 55 1 55 54 54 5