NordicTrack E 9.2 Elliptical Uk Manual - Page 6
Assembly
View all NordicTrack E 9.2 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tool(s): one Phillips screwdriver one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call CUSTOMER SERVICE (see the front cover of this manual) and register your product. 2. While a second person lifts the rear of the Frame (1), attach the Rear Stabilizer (70) to the Frame 2 with two M10 x 95mm Screws (82). 70 1 82 6