NordicTrack E 9.2 Elliptical Uk Manual - Page 7
Orient the Upright 2 and the Top Shield Cover
 |
View all NordicTrack E 9.2 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. While a second person lifts the front of the Frame (1), attach the Front Stabilizer (73) to the 3 Frame with two M10 x 95mm Screws (82). 73 82 1 4. Orient the Upright (2) and the Top Shield Cover (37) as shown. Slide the Top Shield Cover 4 upward onto the Upright. Have a second person hold the Upright (2) near the Frame (1). See the inset drawing. Locate the wire tie in the Upright (2). Tie the lower end of the wire tie to the Wire Harness (42). Next, pull the upper end of the wire tie upward out of the top of the Upright. Then, untie and discard the wire tie. Tip: To prevent the Wire Harness (42) from falling into the Upright (2), secure the Wire Harness with a rubber band or a piece of tape. Wire Tie 37 2 42 1 2 42 1 Wire Tie 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
7
3.
While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (73) to the
Frame with two M10 x 95mm Screws (82).
3
1
82
73
4
Wire
Tie
2
42
37
1
1
2
42
Wire Tie
4.
Orient the Upright (2) and the Top Shield Cover
(37) as shown. Slide the Top Shield Cover
upward onto the Upright.
Have a second person hold the Upright (2) near
the Frame (1).
See the inset drawing.
Locate the wire tie in
the Upright (2). Tie the lower end of the wire tie
to the Wire Harness (42). Next, pull the upper
end of the wire tie upward out of the top of the
Upright. Then, untie and discard the wire tie.
Tip: To prevent the Wire Harness (42) from
falling into the Upright (2), secure the Wire
Harness with a rubber band or a piece of
tape.