NordicTrack Elite 7.4 Bike English Manual - Page 11

Wire 43 and to the Frame Pulse Wires 42.

Page 11 highlights

7. Identify the Right Handlebar (7), and orient it as shown. 7 108 Attach the Right Handlebar (7) to the right side of the Console Bracket (108) with three M8 x 13mm Screws (116); start all the Screws, and then tighten them. 114 Repeat this step to attach the Left 116 Handlebar (114). 7 8. Have a second person hold the Console (4) near the Console Bracket (108). Untie and discard the wire tie (not shown). Connect the wires on the Console (4) to the Main Wire (43) and to the Frame Pulse Wires (42). Then, insert the excess wire into the Console Bracket (108). 8 4 43 108 42 9. Tip: Avoid pinching the wires. Attach the Console (4) to the Console Bracket (108) with four M4 x 16mm Screws (77); start all the Screws, and then tighten them. 9 4 108 77 77 Avoid pinching the wires 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

11
7
7
108
114
116
8
4
42
43
7.
Identify the Right Handlebar (7), and orient it as
shown.
Attach the Right Handlebar (7) to the right side of
the Console Bracket (108) with three M8 x 13mm
Screws (116);
start all the Screws, and then
tighten them.
Repeat this step to attach the Left
Handlebar (114).
8.
Have a second person hold the Console (4) near
the Console Bracket (108).
Untie and discard the wire tie (not shown).
Connect the wires on the Console (4) to the Main
Wire (43) and to the Frame Pulse Wires (42).
Then, insert the excess wire into the Console
Bracket (108).
9
4
77
108
9.
Tip: Avoid pinching the wires.
Attach the
Console (4) to the Console Bracket (108) with
four M4 x 16mm Screws (77);
start all the
Screws, and then tighten them.
108
Avoid pinching
the wires
77