NordicTrack Elite 7.4 Bike English Manual - Page 13

13. Identify the Right Accessory Tray (102). Attach the Right Accessory Tray (102) to the Seat Handlebar (25) with two M4 x 19mm Flange Screws (118). Repeat this step to attach the Left Accessory Tray (56). 13 56 102 118 25 14. Tip: Avoid damaging the Control/Pulse Wire (107) during this step. 14 10 106 Attach the Seat Handlebar (25) to the Seat Frame (10) with four M8 x 40mm Bolts (105) and 25 four M8 Locknuts (106); start all the Locknuts, and then tighten them. See the inset drawing, which shows the left side of the exercise bike. Plug the Control/ Pulse Wire (107) fully into the Frame Pulse Receptacle (42) on the left side of the exercise bike. 105 107 42 107 15. Attach the Seat (9) to the Seat Frame (10) with four M6 x 38mm Screws (75) and four M6 15 Washers (88); start all the Screws, and then 9 tighten them. Note: Only two Screws and two Washers are shown. 10 88 75 13