NordicTrack Professional Series 4000 Treadmill English Manual - Page 26
The Information Mode/demo Mode
View all NordicTrack Professional Series 4000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
8 Press the RESET button again and delete or add TV channels. the information mode is selected, the main display will show the following information: After all valid TV channels have been stored in the console's memory, you can delete unwanted channels or add other channels. To delete or add a channel, first press the CHANNEL + or - button until the channel number appears in the main display. The left side of the main display will show the total number of hours that the treadmill has been used. The center of the main display will show the total distance that the walking belt has moved. Next, press the + or - button above the ENTER AGE/WT button until the word DELETED (to delete the channel) or SAVED (to add the channel) appear in the main display. Then, select the next channel that you want to delete or add. Repeat this process until you have finished deleting or adding channels. 9 When you are finished changing television settings, hold down the CHANNEL + and - buttons for a few seconds. THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total distance that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode. To select the information mode, hold down the STOP button while inserting the key into the console. When The right side of the main display will show an E for English miles or an M for metric kilometers. Press the SPEED + button to change the unit of measurement if desired. IMPORTANT: Make sure that there is not a letter D in the main display. If a D appears, the console is in the "demo" mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence; the buttons on the console will not operate. If a D appears in the main display when the information mode is selected, press the SPEED - button so the D disappears. To exit the information mode, remove the key from the console. 26