Oki B2520MFP B2520 MFP/B2540 MFP User's Guide (Amer Eng) - Page 51
Connections, USB Connection, Test the driver installation. - oki driver
View all Oki B2520MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
B2520 / B2540 It is possible to add LAN printers without installing the Companion Suite Pro software on Windows 2000 and XP. From the Windows menu Start > Parameters > Printers and faxes, select "Add Printer" and follow the instructions on screen. Connections Make sure that your multifunction machine is powered off. USB Connection The connection between the PC and the machine requires a USB 2.0 shielded cable no more than 3 meters long. 8 Select INSTALL SOFTWARE AUTOMATICALLY (RECOMMENDED). Click NEXT. 9 Click FINISH. The Software driver is installed. Test the driver installation. To test the USB and printer driver installation, print a test page: 1 Click START >SETTINGS >PRINTERS & FAXES. 2 Right click OKI B2500 MFP. 3 Click PROPERTIES. 4 Click the PRINT TEST PAGE button. Reinstall the drivers if the installation failed. You can now use the multifunction machine to print or scan your documents. You can connect the USB cable before installing the Companion Suite Pro software on Windows 2000 and XP. However, it is recommended to install the Companion Suite Pro software first and then to connect the USB cable to your machine. If you connect the USB cable before installing the Companion Suite Pro software the recognition system (plug and play) identifies automatically that new hardware has been added. To start your machine driver's installation, follow the instructions on screen. If a window asking about the location of the drivers pops up, then indicate the installation CD-ROM. 1 Locate your USB cable connectors and connect as shown below on the picture. 2 Power on your multifunction machine. The FOUND NEW HARDWARE WIZARD window appears. 3 Select YES THIS TIME. Click NEXT. 4 Select INSTALL SOFTWARE AUTOMATICALLY (RECOMMENDED). Click NEXT. 5 Click FINISH. The USB driver is installed. 6 The FOUND NEW HARDWARE Wizard appears. 7 Select YES THIS TIME. Click NEXT. - 51 -